Posted by Polygon on March 27, 2018 11:28:31A lot of the things that I do with my boots are pretty basic, so I don’t need to worry about them getting dusty or the wax getting on them.
For the most part, though, I do use the same sort of waxing process for my snakes as I would for my shoes.
When I’m out and about, I’ll usually go with a spray gun, which is essentially a large metal cylinder that I’ll use to spray wax all over my feet.
The idea is that this wax will actually dry faster, and I’ll be able to reuse it later.
Once I’m finished with my snake print boots (which, to be fair, are also pretty basic), I’ll go through a similar process of polishing and polishing again.
I will then start working on the boots and then I’ll sand down the bottom of the boot, and then polish the entire boot.
The polish is a combination of the wax, the wax-on-wax-on sandpaper, and a little bit of a high-pressure sprayer, so it’s quite effective.
For this step, I spray my boots on the same wax-and-waxy-oil-based paint as the boots.
That way, when I’m done, the boots will be completely glossed and polished.
I’ll then put them on the back of my truck and I can use the boots to transport them around the country.
I’m a big fan of high-tech boots, and it’s easy to see why.
When it comes to getting my boots professionally polished, I always go for a special wax-based wax.
That is the way I’ve always gone with my shoes and shoeshoes.
The process is fairly simple: You simply spray your boots with the wax you’ve chosen, then use your wax brush to apply the wax to the surface of your shoes, and you can use your hand to gently swirl the wax around and around until you’ve got a nice, glossy finish.
I usually just spray a coat of wax and sand onto the shoes before I go ahead and polish them.
That’s how I got the snakes printed on these snakes.
I’m using a lot of high quality, high-quality wax.
When you’re working on a big project like this, I just like to be as efficient as possible.
The wax is used in a lot more places than just the boots, so when I get to the boots I spray a good amount on the underside, and at that point, I want to be able and see if the snakes are really sticking to them or not.
If they’re sticking to the wax and aren’t sticking to anything, then I think they should be good.
If I’m going to have to use a little more wax than normal, I usually take it out and start over, so that I can reuse it.
This is the underside of a snake print boot.
When they’re dry, I like to wipe them with a paper towel to get rid of any remaining wax residue.
After I’ve done the waxing and polish, I sand down my boots, making sure that they are absolutely flat and not bumpy.
I then sand down a little on the top and bottom to make sure they’re still shiny.
This will help the wax adhere to the leather, so if you have any wax residue on the outside of your boots, you can still get a nice gloss to the inside of the boots too.
Next up, I’m working on my boots in sandpaper.
Sanding is something that you do on the inside and the outside, and the process is basically the same.
You just spray sandpaper on the soles of your feet, and once the sandpaper dries, you’ll spray the wax into the boots like you would a regular shoe.
It will take some time, but I do love the idea of sanding and waxing my boots to make them shiny and smooth, so the process takes less time than it would for a normal wax job.
I used the same process of sandpaper as I did with the snakes, but this time I sprayed it on the boot itself instead.
The sandpaper is a very, very strong, durable material, and sanding boots on wax will give them a nice glossy finish, but it also tends to leave some wax residue in the boots as well.
I found that this residue was more annoying than anything else I was dealing with, and so I went ahead and just let it sit overnight.
It’s very, VERY easy to get out of that wax residue, and that’s the only reason that I did it this way.
Once the boots are sanded, they’re ready for the next step: polishing.
I use a soft white polish like the kind you might use on a paintbrush.
It helps to have some type of gloss on the wax before you start